null

Disc Brake Caliper-Unloaded Caliper with bracket Rear Left Cardone fits Acura RDX 2018-13, Honda Crosstour 2015-12, CR-V 2016-07

(No reviews yet) Write a Review
SKU:
6425488
UPC:
884548116313
MPN:
19-B6886
Condition:
Refurbished
Availability:
Ships In 1-2 Business Days
Weight:
8.00 LBS
  • Disc Brake Caliper-Unloaded Caliper with bracket Rear Left Cardone fits Acura RDX 2018-13, Honda Crosstour 2015-12, CR-V 2016-07
  • Disc Brake Caliper-Unloaded Caliper with bracket Rear Left Cardone fits Acura RDX 2018-13, Honda Crosstour 2015-12, CR-V 2016-07
  • Disc Brake Caliper-Unloaded Caliper with bracket Rear Left Cardone fits Acura RDX 2018-13, Honda Crosstour 2015-12, CR-V 2016-07
  • Disc Brake Caliper-Unloaded Caliper with bracket Rear Left Cardone fits Acura RDX 2018-13, Honda Crosstour 2015-12, CR-V 2016-07
$119.94

Description

Expertly remanufactured to rigorous quality and performance standards, all CARDONE® Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.

Vehicle Fitment Summary

Acura RDX 2018-13
Honda Crosstour 2015-12, CR-V 2016-07

Attributes

Part Type
Disc Brake Caliper
Features and Benefits

Pistons are durable, resistant to cracking or pitting and handle great loads.

Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.

Mounting bracket is included where applicable for a hassle-free installation.

Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.

New banjo bolts are included where applicable to ensure a perfect fit and quick installation.

New bleeder screws provide trouble-free bleeding and a positive seal.

New washers are included where applicable for a proper seal.

A plastic cap plug protects every brake port thread to ensure trouble-free installation.

New stainless steel hardware clips and new mounting pins are included where applicable.

As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.

Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

First Application Year
2007
Inlet Port Size
M10 x 1.0
Piston Quantity
1
Piston Material
Steel
Package Contents
Caliper, Bracket, Hardware Kit
Bleeder Port Size
M10 x 1.25
Brake Caliper Finish
Unfinished
Installation Hardware Included
Yes
Pads Included
No
Mounting Bolts Included
No
E-Waste
No
Piston Size (OD) (mm)
38.00
Piston Size (OD) (in)
1.50
Caliper Color
Gray
FAQs

Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa?

Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer’s recommendations.

What type of fluid should I use: DOT 3, DOT 4, or DOT 5?

As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container.

Car pulls to one side during braking. Why?

Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation.

Brakes squeal all of the time. What's causing the squeal?

Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish.

Could calipers be the cause of a low brake pedal?

A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder.

What type of grease is used on floating caliper mounting pins?

A silicone grease is used on floating caliper mounting pins.

Do all of your Calipers come with the new hardware and a mounting bracket for installation?

New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications.

View AllClose